There are many people who like privacy while sitting in the car. So they decided to use window tint. They want to relax or simply avoid the harmful rays of the sun outside.
However, the sad thing is that window tint has a relatively short lifespan. After using it for a long time, the product will fade and no longer work. Therefore, you need to peel off the old layer to replace it. So, how to clean old film on windows without tint glue? Join us to learn the most effective ways to remove window tint glue today.
Reasons To Remove Window Tint Glue
Tint glue, when deposited on the window, will cause certain obstacles. Here are the reasons why you need to remove window tint glue:
Aesthetics
The first is the aesthetics of the car. Specifically, when you want to replace a new film, you will remove all the old stickers. During peeling off the old movie, the adhesive inside will remain on the window, making the car’s glass door no longer clean.
Even in the long run, the remaining tint glue will cling to more dirt outside the air. If you don’t clean it regularly, the windows will become unappealing and unsightly.
Limited vision
Another point of influence is limited visibility. The car window is where you can see outside. But just because a few pieces of tint glue are stuck, your ability to observe your surroundings will be limited.
Not only that, as we said, window tint films have a short shelf life. So, in the long run, the product will turn purple. Therefore, your vision will be completely blocked if not changed in time.
Ways On How To Remove Window Tint Glue 2025?
Window tint glue inevitably remains. So, you can learn some ways to remove them most effectively in the following sections:
Clean with water and scrape
You can completely clean with water for glass doors that don’t have a lot of tint glue. Specifically, after peeling off the old film, you should get the car’s windows to moisten the tinted adhesive. Then, use a tool to scrape off any remaining stains.
There is a small note that you should be very careful when shaving tint glue. Because the car window is skinny, using too much force will cause the glass to break.
Heat tint glue
In fact, tint glue is a solidified liquid glue that helps to stick to any object. So, you can use a dryer or a steam iron to melt the product.
The implementation is straightforward, and you just need to turn on the dryer on hot mode, heat it directly on the tinted glue. Then wait until they start to melt before you can clean the window surface.
Alternatively, if you can’t use the dryer, you can leave your car out in the sun. Using the sun will take some time, but you won’t need to prepare any other tools.
Use glue remover
Currently, many common glue removers can help you clean tint glue. In particular, the best quality eraser products are Goo Gone and WD40. These 2 compounds are elementary enough to apply to all the remaining glue tints.
To use these two products:
- Prepare a paper or hand towel specially designed for cleaning windows.
- Spray the compound on the area to be cleaned, wait for 1-2 minutes.
- Use a washcloth with water.
Use alcohol or alcohol
Alcohol or liquor is one of the most straightforward products to find today. These 2 liquids can remove tint glue. However, these 2 products will not be clean at first use. You have to retry several times to separate the tinted glue.
However, please note that I use it in an airtight area or use it near a fire. Because alcohol and alcohol are highly flammable, you need to ensure your safety and that of others.
Use nail remover
Using a nail remover will also help you get rid of the tinted glue on car windows. The use of nail remover also brings unexpected results.
However, this product is the same as alcohol or alcohol. You need to be patient and do it many times to be successful. There is a solid point to using nail polish remover that it makes your car windows shiny.
FAQs
In addition to the reasons and ways to handle tint glue, there are many unanswered questions. We have selected a few questions to answer below:
Can I clean tint glue myself at home?
In fact, just like how to fix a hood latch that won’t lock, you can also do How to remove window tint glue at your home. Have the necessary tools ready to carry out the cleaning.
Cleaning products are usually quite close and easy to find, for example, soap or alcohol. As for glue remover or nail remover, you can search on the website or buy directly at the store.
How to clean tint glue with hot steam?
How to clean tint glue on windows with hot steam is quite popular today. Before doing this, prepare a dryer or steam iron; Absorbent cloth: a small bucket of water. You can then perform the following steps:
- Step 1: Clean the window surface with water
- Step 2: Use the dryer on the place where the tinted glue needs to be scrapped
- Step 3: After the tinted glue is easier to scrape, you can use a scraper or cloth to wipe it off
- Step 4: Finally, when the car window is no longer tinted, wipe the water again where the tint glue sticks before installing a new window tint.
Conclusion
To keep your car windows clean and shiny, pay attention before replacing the tint. Hopefully, the above article has helped you find effective ways to remove window tint glue from your car.
Leave a Reply